Lava Z50 FRP Unlock and Tool DL Image Fail Final Solution Here By Tech-28

• Now Click on Start and connect switched off Lava Z50 Phone to Computer Using USB cable. (Sometimes you need to press the boot key, Lava Z50 boot keys = switch of the phone and Hold the volume down key then connect the phone to PC)
• After format OK remove the phone and switch on the phone and you are done.

If you are facing Tool DL Image Fail after flashing or unlocking frp on the Lava Z50 Android smartphone then here is the solution. If the phone is showing Tool DL Image fail then it's continuously restarts and you unable to use the phone, but after following the below steps you can easily recover the phone to normal mode.

Steps:

• It's similar to the above FRP unlock step but instead of Format here we do Flash or Download Firmware Using SP flash tool.
• Download Lava Z50 FRP Solution.rar file from the below link.
• Open SP Flash Tool and Load MT6737M_Android_scatter file.
• Then select Download Only and then select Only Cache (Untick all other see the image below)
• Now go to Options --> Option --> Download and Select USB Checksum and Storage Checksum.
• Now Click on Download button and connect the phone using boot key (same as frp process above)
• After Download OK remove the phone and switch on it, now it will work fine without Tool DL Image Fail error on your Lava Z50.
  

DOWNLOAD

LINK::-http://gsul.me/bmYf